Accessories & Service
Programming accessories
Programming accessories Dimensions
Part number Z 139.005 Programming cable for parallel shaft encoders, CD with ProGeber software and manual
Terminal assignment Encoder function - RxD GND TxD Mating connector Core M12, 5-pins colour Pin 1 Pin 2 Pin 3 Pin 5 brown white blue black grey PC connector D-SUB, 9-pins - Pin 3 Pin 5 Pin 5 Pin 2 Jumper 4-6 and Jumper 7-8 Connect encoder to voltage supply (UB/red/pin 36 and GND/blue/pin 37) using the supplementary 37-pin D-SUB connector.
P/R Mode Pin 4
1
www.baumerivo.com
30/10/2008
Subject to modification in technic and design. Errors and omissions excepted.
|
